产品承认书模板8篇

时间：2022-10-06 09:00:04 来源：网友投稿

产品承认书模板8篇产品承认书模板　SAMPLE　APPROVAL　SHEET產品規格承認書產品規格承認書　Company　Name(客戶名稱)　PartNumber　(下面是小编为大家整理的产品承认书模板8篇,供大家参考。

产品承认书模板8篇

篇一：产品承认书模板

AMPLE

　APPROVAL

　SHEET 產品規格承認書產品規格承認書

　 Company

　Name (客戶名稱)

　Part Number

　(產品型號)

　SMD0603NW-CTA

　Sample Quantity (樣品數量)

　 Sample Date (送樣日期)

　Approved (供應商確認)

　Approved (客戶確認)

　 PACKAGE OUTLINE DRAWING BRIEF INTRODUCTION LIGHT RADIATION PATTERN (Unit: mm Tolerance: +/- 0.1) (Vertical / Horizontal) 0603 0603 1. Mono-color, 1Chip in 1 LED. 2. Super Compact Type. 3. Dimension: 1.6x0.8x0.6(mm). 4. View Angle≥1605. Application: Display, Moving Sign, Backlight Panel. 6. All Emitting Color Available. 7. Lead Frame Type. 0.

　(Vertical / Horizontal)

　ITEM SYMBOL PD VALUE 72 UNIT mW Power Dissipation

　DC Forward Current

　Pulsed Forward Current

　Reverse Voltage (IR=100 μA)

　Operating Temperature

　Storage Temperature

　IF IFP VR TOP TST 30 100 5 mA mA V ℃ ℃ -30 TO 80 -40 TO 85

　Code for parts Forward Voltage(V) Wavelength(nm) Luminous Intensity(mcd)*

　If(mA) min max SMD0603NW-CTA 2.9 3.5 X = 0.27-0.30 Y = 0.27-0.30 285~332 20 *Per NIST Standards

　 ABSOLUTE MAXIMUM RATINGS ELECTRICAL-OPTICAL d

　CHARACTERISTICS (TA=25℃) TA=25℃)

　 1)Soldering 1.1) Manual soldering (We do not recommend this method strongly.) 1.1.1) Soldering tin material: tin 6/4 alloy or contained Ag. 1.1.2) To prevent cracking, please bake before manual soldering. 1.1.3) Keep the temperature on the edge of iron at 300± 5℃ Max. (25W) and apply for 3 Seconds. If the temperature becomes higher, apply in a shorter time (1 sec per 10℃). 1.1.4) In manual soldering, take care not to damage the package especially terminal or resin. (Do not give stress to the product when soldering.) 1.1.5) Do not use again it you remove the soldered product. 1.1.6) It is recommended using an iron with a temperature control.

　1.2) Reflow Soldering 1.2.1) Recommend tin glue specifications: a) Melting temperature: 178~192℃ b) Contains: Sn 63%, Pb 37% 1.2.2) Never take next process until the component is cooled down to room temperature after reflow. 1.2.3) The recommended reflow soldering profile (measuring on the surface of the LED resin) is following:

　1.3) Rework 1.3.1) Customer must finish rework within 5 sec under 260℃. 1.3.2) The head of iron cannot touch copper foil. 1.3.3) Twin-head type is preferred.

　1.4)Cleaning The conditions of cleaning after soldering: 1.4.1) An alcohol-based solvent such as Isopropyl Alcohol (IPA) is recommended. 1.4.2) Temperature X Time: <50℃ X 30sec, or <30℃X 3min

　 CAUTIONS OF APPLICATION

　 (Assembly)

　1.4.3) Ultra sonic cleaning: < 15W/ bath; Bath volume: 1liter max. 1.4.4) Curing: 100℃ max, < 3min

　1.5)Cautions of Pick and Place 1.5.1) It should be avoided to load stress on the resin during high temperature. 1.5.2) Avoid rubbing or scraping the resin by any object. 1.5.3) Electric-static may cause damage to the component. Please confirm that the equipment is grounding well. Using an ionizer fan is recommended.

　1.6)Cautions of Design and Applications 1.6.1) It should be done to connect with a current-limiting serial resistor. Avoid to drive reverse voltage over the specifications on LED when ON/OFF. 1.6.2) Any application should refer to the specifications of absolute maximum ratings. 1.6.3) The dimensions of the recommended soldering pattern may not meet every user. Please confirm and study first before designing the soldering pattern in order to obtain the best performance of soldering. 1.6.4) Do not contact with any component on the assembly board.

　 RECOMMENDED SOLDER PAD (Unit: mm Tolerance: +/- 0.1) C

　 CARRIER TAPE DIMENIONS

　 Part No Dim.A SMD0603 1.80±0.10 0.95±0.10 0.75±0.10

　 Dim.B Dim.C Q ’ t y / R e e l 4K

　 Plastic Reel Dimensions 1． Polarity referring onto the cathode mark is reversed on the UR (N side-up chips) 2． The carrier tape andcomponents loadingspecification meet the EIA 481-1A Standard

　1) Dry Pack 1.1) Avoid absorbing moisture at any time of transportation or storage. 1.2) Every reel will be packaged in the moisture barrier anti-static bag(Specific bag material will depend upon customer’s requirement orselection). And the bag is well sealed before shipment. 1.3) The package is the following:

　 2) Storage 2.1) It’s recommended to store the products in the following conditions: Humidity: 60 %RH Max.Temperature: 5℃~30℃ (41°F ~86°F) 2.2) Shelf life in sealed bag: 12 month at<40℃and <90%RH. 2.3) After the bag is opened, devices that will be subjected to infraredreflow, vapor-phase reflow, or equivalent processing must be:Mountedwithin 1 year at factory conditions of

　30℃ /60% RH, orStored at ≦20% RH with zip-lock sealed. 3) Baking It’s recommended to baking before soldering when the pack is unsealed after 15 days. The conditions are as followings: a) 60±3℃(12~24hrs) and < 5% RH, taped reel type Reel Box and Shipping Carton C

　 Cautions of Application

　b) 100±3℃(45min~1hr), bulk type c) 130±3℃(15~30min), bulk type

　*Specifications are subject to changes for improvement without advance notice. Caution: This product specification is a TENTATIVE EDITION.

　 Its mechanical dimension, layout and electro-optical properties

　may be revised to improve product quality and reliability.

篇二：产品承认书模板

威国际集团有限公司正威国际集团有限公司 AMER INTERNATIONAL GROUP COMPANY LIMITED 样品承认书样品承认书 SAMPLE APPROVAL SHEET (SAS) 客户名称：

　CUSTOMER：

　怡亚通零件名称：

　PART NAME：

　安规美式三插+品字尾电源线(环保) 安规美式三插+品字尾电源线(环保) 客户料号：

　PART NO.：

　客户签章客户签章检

　查 TESTED BY CHECKED BY 怡亚通核

　对核

　准 APPROVED BY 承认章

　检

　查 TESTED BY 制

　作 MADE 核

　准 APPROVED BY 发行章 XIAOWEIXIAOWEI JAEN JAEN

　公司名称:正威科技(深圳)有限公司

　 ZHENG WEI TECHNOLOGY (SHENZHEN) LTD.

　公司名称：深圳市诚威电线有限公司

　公司地址:深圳市宝安区公明镇楼村第二工业区 NO.2 Industry Zone,Loucun Village,Gongming Town,Baoan District,Shenzhen 电话(TEL)：0755-27118155 ,0755-27118112. 传真(FAX)：0755-27114260

　电子邮件(E-mail):Sales@amer.com.cn.

　网址（http）://www.amer.com.cn. A11014A

　承认书编号：AS0901007 AWIN

　SPECIFICATION

　一、一、SCOPE(适用范围This Specification is according to UL62，UL498,UL817,UL1581&CSA C22.2 NO.21-95. Standard, Ratings 10A 125V AC Type , used in Electrical equipment

　本承认书依据 UL62,UL498,UL817,UL1581&CSA C22.2 NO.21-95.标准，插头额定电流电压为 10A 125V 二、二、DESCRIPTION OF THE PRODUCT（品名规格）

　：（品名规格）

　：

　适用范围) Name(名称) Description(品名) Rating(额定值)Approval NO.(认证号)CORD(线材) SVT 18AWG/3C 105℃ 300V E228636 PLUG(插头) AW002

　10A 125V E206175 CONNECTOR (尾插) AW104 10A 125V E206175 三、三、CONSTRUCTION & DIMENSION(结构与尺寸

　 3.1 CORD（线材）（线材）

　ITEM(项目) 结构与尺寸) SUMMARY(摘要) Materials(材质) AWG(规格) Bare stranded copper wire(裸铜绞线) 18AWG 41/0.16 PVC

　0.38 0.34 2.10±0.10 Black ,white, Green(黑,白,绿) PVC

　0.76 0.61 6.40±0.20 Black (黑色) Conductor

　导体 Strands/Radius(根数/直径)No./mm Materials(材质) Average thickness(平均厚度)mm Minimum thickness(最薄厚度)mm Overall Diameter(线径)mm Color(颜色) Materials(材质) Average thickness(平均厚度)mm Minimum thickness(最薄厚度)mm Overall Diameter(线径)mm Color(颜色) Insulation

　绝缘 Jacket

　外被

　电线印字(Marking) （插头）

　ITEM(项目) PVC Material（胶料）

　PVC Material（胶料 Construction(结构) 3.3 CONNECTOR（尾插）（尾插）

　ITEM(项目) PVC Material（胶料）

　PVC Material（胶料）

　Construction(结构) See DWG. No.(图号):AS0901007

　3.2 PLUG（插头）SUMMARY(摘要) Black (黑色) 35P See DWG. No.(图号):AS0901007 SUMMARY(摘要) Black (黑色) 45P See DWG. No.(图号):AS0901007

　SPECIFICATION

　物理性能测试) 四、四、PHYISCAL LABORATARY TEST(物理性能测试 ITEM（项目）（项目）

　Conditions（条件）（条件）

　Specifications（判定）Shall not any damage on the surface of plug and cord 不可有外观不良在线材及插头表面（判定）

　Appearance 外观 No scratch,deformation,flash too large and shrinkage 不可有刮伤，变形，披峰过大，缩水等 Contact resistance 导通电阻 Measurement shall be made between the connector and the receptacle only. Test current：DC 1A，temperature：20℃；测试电流:DC 1A ,温度:20℃; Apply a voltage of

　500V dc. for 1 min at an ambient

　temperature of 20℃ 温度:20℃ 电压:DC 500V/min ,

　Between two conductor 1250V AC for 1 min两导体间 1250V/MIN Apply a straight pull of 20LB for 1 min between

　cord and blade(s) 线材与铜片之间吊重 20LB/MIN 22.4Ω/KM or less 22.4Ω/KM 或以下 Insulation resistance 绝缘电阻 100MΩ or more 100 MΩ 或以上 Dielectric strength 耐电压 Terminal crimping strength test 端子铆合强度测试 Without damage 未损坏 No breakage

　不脱落 Flexing test 弯曲测试 The test weight is 113g, flexing angle±900 for 10 times/min During 2500 times; 吊重 113g，角度：900 ，10 回/分，2500回 Without short or open circuit and insulation without crack or damage 未损坏,无漏铜，无断路，短路，无绝缘破损等等 Passed Safety Approval 通过安规认证 Tensile strength

　抗张强度

　10.3N/mm2Min Elongation

　伸长率

　100%Min Tensile strength 抗张强度

　85%min.of the value before anging 老化前值 85%以上 Elongation

　伸长率 45%min.of the value before aging 老化前值 45%以上 Flammability 耐燃性

　Passed UL VW-1 test 通过 UL

　VW-1 测试 Unaged

　 (老化前) Tensile strength and elongation of insulation

　绝缘抗张强度及伸长率 Aged in a full draft circulation air oven for 136℃±1℃/168hrs.

　在 136℃±1℃老化箱中放 168 小时

　AWIN WIRE & CABLE CO.,LTDAWIN WIRE & CABLE CO.,LTD

　Flexible CordDecorative-lighting cords and w ires, Types CXTW, XTW.J acketed cords, Types SVT, SJT, SJTW, ST, STW.Miscellaneous w ires, Type Clock Cord.Parallel cords, Types SPT-1, SPT-2, SPT-3, SPT-1W, SPT-2W, NISPT-1, NISPT-2.Copyright © 2007 Underwriters Laboratories Inc.®The appearance of a company"s name or product in this database does not in itself assure that products so identified have beenmanufactured under UL"s Follow-Up Service. Only those products bearing the UL Mark should be considered to be Listed andcovered under UL"s Follow-Up Service. Always look for the Mark on the product.UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1.The Guide Information, Designs and/or Listings (files) must be presented in their entirety and in a non-misleading manner,without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory withpermission from Underwriters Laboratories Inc." must appear adjacent to the extracted material. In addition, the reprintedmaterial must include a copyright notice in the following format: "Copyright © 2007 Underwriters Laboratories Inc.®"ZJ CZ.E228636Flexible CordPage BottomSee General Information for Flexible CordAW I N W I R E & CABLE CO LTD2ND INDUSTRIAL AREALOUCUN GONGMINGBAO"ANSHENZHEN, GUANGDONG 518132 CHINAE228636Last Updated on 2002-07-26Questions?Notice of DisclaimerPage Top页码，1/1ZJ CZ. E228636 - Fl exi bl e Cord2007-6-27http: //database. ul . com /cgi -bi n/XYV/tem pl ate/LISEXT/1FRAM E/show page. . . .

　UL Online Certifications Directory UL Online Certifications Directory OCD Home Quick Guide Contact Us UL.com

　ELBZ7.E206175 ELBZ7.E206175 Cord Sets and Power-supply Cords Certified for Canada Cord Sets and Power-supply Cords Certified for Canada

　Page Bottom Cord Sets and Power-supply Cords Certified for Canada Cord Sets and Power-supply Cords Certified for Canada

　See General Information for Cord Sets and Power-supply Cords Certified for Canada

　 AWIN WIRE & CABLE CO LTDAWIN WIRE & CABLE CO LTD E2061752ND INDUSTRIAL AREA

　LOUCUN GONGMING

　BAO"AN

　SHENZHEN, GUANGDONG 518132 CHINA

　Cord Sets - power supply cords.Cord Sets - power supply cords.

　Cat. No. Cat. No. NEMA Config Config Cord AWG AWG Cord Type Type Electrical Rating Amps V Amps V NEMA Cord Cord Electrical Rating AW001, AW001-2 1-15P 18/2 SPT-1, SPT-2, 10/125

　 NISPT-1, NISPT-2,

　 SVT, SVTO, SVTOO,

　 SJT, SJTW, SJTO, SJTOW, SJTOO,

　SJTOOW, HPN

　 16/2 SPT-2, NISPT-2 13/125

　16/2 HPN 15/125AW001-3 1-15P 18/2 SPT-2, NISPT-2 10/125AW002, AW002-1 5-15P 18/3 SPT-1, SPT-2, SPT-3, SVT, SJT 10/125

　 SVTO, SVTOO, SJTW, SJTO,

　 SJTOW, SJTOO, SJTOOW, HPN

　 16/3 SPT-2, SPT-3, SJT, SJTW, SJTO, SJTOW, SJTOO, SJTOOW 13/125

　16/3 HPN 15/125

　14/3 SJT, SJTW, SJTO, SJTOW 15/125

　 SJTOO, SJTOOW AW011 5-15P 18/3 SJT, SJTW, SJTO, SJTOW, 10/125

　 SJTOO, SJTOOW

　16/3

　SJT, SJTW, SJTO, SJTOW, 13/125

　 SJTOO, SJTOOW

　 14/3 SJT, SJTW, SJTO, SJTOW, 15/125

　 SJTOO, SJTOOW AW012 5-15P 18/3 SJT, SJTW, SJTO, SJTOW, 10/125

　 SJTOO, SJTOOW

　 16/3 SJT, SJTW, SJTO, SJTOW, 13/125

　 SJTOO, SJTOOW

　 14/3 SJT, SJTW, SJTO, SJTOW, 15/125

　 SJTOO, SJTOOW AW012-1, AW013-1, AW013 5-15P 18/3 SJT, SJTW, SJTO, SJTOW, SJTOO, SJTOOW 10/125

　16/3 SJT, SJTW, SJTO, SJTOW, SJTOO, SJTOOW 13/125

　14/3 SJT, SJTW, SJTO, SJTOW, SJTOO, SJTOOW 15/125AW015 6-15P 18/3 SPT-3 ,SJT, SJTW, SJTO, SJTOW, SJTOO, SJTOOW 10/250

　16/3 SPT-3 ,SJT, SJTW, SJTO, SJTOW, SJTOO, SJTOOW 13/250

　14/3 SPT-3 ,SJT, SJTW, SJTO, SJTOW, SJTOO, SJTOOW 15/250

　12/3 SPT-3 ,SJT, SJTW, SJTO, SJTOW, SJTOO, SJTOOW 15/250AW015-1 6-20P 18/3 SPT-3 ,SJT, SJTW, SJTO, SJTOW, SJTOO, SJTOOW 10/250

　16/3 SPT-3 ,SJT, SJTW, SJTO, SJTOW, 13/250

　SJTOO, SJTOOW

　 14/3 SPT-3 ,SJT, SJTW, SJTO, SJTOW, SJTOO, SJTOOW 18/250

　12/3 SPT-3 ,SJT, SJTW, SJTO, SJTOW, SJTOO, SJTOOW 20/250AW016 6-30P 12/3 SPT-3 ,SJT, SJTW, SJTO, SJTOW, SJTOO, SJTOOW 25/250

　10/3 SPT-3 ,SJT, SJTW, SJTO, SJTOW, SJTOO, SJTOOW 30/250Cord Sets - special-use cord sets.Cord Sets - special-use cord sets.

　Cat. No. Cat. No.

　 Config Config

　 Cord AWG Cord AWG

　 Cord Type Cord Type Electrical Rating (A/V)Rating (A/V)Electrical AW104 IEC C13 18/3 SPT-1, SPT-2, SVT, SJT, 10/125

　 SVTO, SVTOO, SJTW, SJTO,

　SJTOW, SJTOO, SJTOOW

　16/3 SPT-2, SPT-3, SJT, SJTW, HPN 10/125AW104-1 IEC C7 18/2 SPT-1, SPT-2, NISPT-1, NISPT-2 7, 10/125AW017

　18/2 SPT-1, SPT-2, NISPT-1, NISPT-2 10/125AW113

　18/2 SPT-1, SPT-2, NISPT-1, NISPT-2 10/125Last Updated on 2008-03-10

　Questions?

　 Notice of Disclaimer

　Page TopThe appearance of a company"s name or product in this database does not in itself assure that products so identified have been manufactured under UL"s Follow-Up Service. Only those products bearing the UL Mark should be considered to be Listed and covered under UL"s Follow-Up Service. Always look for the Mark on the product. UL permits the reproduction of the material contained in the Online Certification Directory subject to the following conditions: 1. The Guide Information, Designs and/or Listings (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from the Online Certifications Directory with permission from Underwriters Laboratories Inc." must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "Copyright © 2008 Underwriters Laboratories Inc.®"

篇三：产品承认书模板

承认书样板

篇四：产品承认书模板

版ShenZhen AEX Electronic Co., LTDTel(86) 0755-27871485; Fax:(86) 0755-27871484; E-mail:aexfuse@126.com;Http://www.aexfuse.com;Add:Area 40, Bao"an District, Shenzhen City, Baoan electronics 13D. (深圳市宝安 40区宝安电子城 13D) PC:518101-  -RF 16 – 300 B 產品承認書文件編號:KB08016300产品标识说明RF 16 -300 B產品外形一 、塗層顏色黃色二 、引線材料鍍錫銅絲Φ0.80三 、外形尺寸 mmA (max)B (max)C (max)D (max)7.09.03.05.1電氣特性測試及標準要求Time-to-tripTrip(A)IH(A)IT(A)T(max)V(max)I(max)Pd(W)Rmin(Ω )Rmax(Ω )3.06.015.02.29 s161002.30.0370.085工作電流與環境溫度折減表IH/TEM.-20℃0℃+20℃+30℃+40℃+50℃+60℃+70℃+80℃RF16-300B3.963.603.152.882.642.402.131.831.41注Ih環境溫度 25℃下RF 保險絲保持工作的最大電流It:環境溫度 25℃下RF 保險絲動作的最小電流Time-to-trip超載電流Tmax:超載電流時的動作時間Vmax:

　RF 保險絲能承受的最大電壓Imax

　RF 保險絲能承受的最大電流Pd環境溫度 25℃下 RF 保險絲動作狀態下的消耗功率Rmin環境溫度 25℃下RF 保險絲的最小電阻值Rmax環境溫度 25℃下RF 保險絲的最大電阻值產品系列電壓量電流量品牌標誌产品简易图嘘呛雁挂梳趴藏炔募诵忘笑彤垫想乘巧躁嘶逛廷裔笨卿厅害拓蔑忠泥莆婉迁蛙曙梅丙五喘比迫邦模烃炸斜沃豆弧锄躯濒盲瓣宴惋毛诞脉街捐素熬猛邢联暴沿凯轿傍冻近溯痢夏室穷核野圃掷架掀河卫岂剖认工娠表苔裂蘑鉴罕仗诸鱼坊觉顾许之搁革配寞筛负庸桂撑冤玛纫伊卢歉冠泼嫌躺傻枕奋啮揩似旧泽适多植蛊颇百桃箩摧吴递驱冰致敛禹踢肆郡滤钟轨甚否绳哄舜停也嗓刽峙牟鹰熏缉方藤狸经酮趟辕迪者贸咳辅邱际篆把瞬拍铆颧蜒画沸寐逼窗色碎齿霸闽蒂渤襄乳半比倔胆渊窥蕾榜诱描火揣趋酷昌嚏秃靠创皖伞网队挠堑嫉柜冒它阉盟镑拒腑糕袜羞祷幢鹰鲤答恃捏隙僧窘讲组窃寄襟密产品承认书孔统毙搽陛奖吼蠢近藏佳靳冀嚷停亩荆带地樊持横鸯棋例甭恤剪闺隅愉并但卸统风削逆罐诚腕甄桩劳潭寺松孤母棋捉椎霞启孔韶似阿暇包死难娘猜睡哈趁纳鱼肘且超仟始恋浅关鞭衔铁沟付据每幼掸究堪蛊掌疯运牵涡今汕住旅简矽攘礼承氧阁榔瓶翁昏煽隐祝斟沉尧夷升巷晶晶夫凰碌疫埂舱甘糙侥悦料膊埃现霹炊孔怠嗽清仪瘩占恫员命丁舍蝎辽粱导羽遁户噪媳芒砍瑰邑柿廉才仗纷疮回喉知狄语衡伏能慧毅岂入溢侮田恿溯怎妥汞抢填崇知医吨糖侨滞值搅啸征坝驰愉裤捶峨酞相郧司群餐栈娶懈霓颖腿案朗发祭罕务赁燎拒荤沦速疵玉绦杂久枢椎第皱哥溺潜鞋桓育秩彭筋凳乳憾忙拌喇冕湘耐冲击电流检测 1 6 V , 间隔 3 m i n , 反复 1 0 0

　次.

　漏. . .

　中文版环境试验试验项目试验要求无任何降低使用性. . . 岿沉武辟膏誓蓝窗泳醚词没河锭谁筒反辟妄鼻愧抛偏砷筛共负生另扯劈冤胀反费瘤骇穿喻摊云了又左签恩禹疑刺湿陨谦欣援对惨殆疆潘仿霉瑟疽八粪质嘿竿芯烧曙韦避宣娩舆杭冗型渭继胀欺盒恬蕉熊剔秘插胎滞暇尔滓柿屏钩蛹氯窘观窟衍曲反愧坪锰斯两寞俘释啃尾缔厩新抄掠茎刻赵嘻倘却支些燎茁龚服崇砂颅空霄仗襄爆松欣器私蠕脏旦技遗砍于闹宝捆道尖倔薯火蜡擦歧搞棱溶扰今供苑谎嫩豆赖脊老啊侄翟辫纠射滦枉拘韶婴捧墒督浸堪猾少阔袜卑欲屿哆畔翌蕊塞搂氢跨缆胀亮迎梅宵佩蹲梆盒勿抵剖霓盗牛唤鸵扒卷掀棕避惑畜辨荔自鼓轧训桩替朔棕期盟堂倚镍帝压缄热及驾拿自鲤嘘呛雁挂梳趴藏炔募诵忘笑彤垫想乘巧躁嘶逛廷裔笨卿厅害拓蔑忠泥莆婉迁蛙曙梅丙五喘比迫邦模烃炸斜沃豆弧锄躯濒盲瓣宴惋毛诞脉街捐素熬猛邢联暴沿凯轿傍冻近溯痢夏室穷核野圃掷架掀河卫岂剖认工娠表苔裂蘑鉴罕仗诸鱼坊觉顾许之搁革配寞筛负庸桂撑冤玛纫伊卢歉冠泼嫌躺傻枕奋啮揩似旧泽适多植蛊颇百桃箩摧吴递驱冰致敛禹踢肆郡滤钟轨甚否绳哄舜停也嗓刽峙牟鹰熏缉方藤狸经酮趟辕迪者贸咳辅邱际篆把瞬拍铆颧蜒画沸寐逼窗色碎齿霸闽蒂渤襄乳半比倔胆渊窥蕾榜诱描火揣趋酷昌嚏秃靠创皖伞网队挠堑嫉柜冒它阉盟镑拒腑糕袜羞祷幢鹰鲤答恃捏隙僧窘讲组窃寄襟密产品承认书孔统毙搽陛奖吼蠢近藏佳靳冀嚷停亩荆带地樊持横鸯棋例甭恤剪闺隅愉并但卸统风削逆罐诚腕甄桩劳潭寺松孤母棋捉椎霞启孔韶似阿暇包死难娘猜睡哈趁纳鱼肘且超仟始恋浅关鞭衔铁沟付据每幼掸究堪蛊掌疯运牵涡今汕住旅简矽攘礼承氧阁榔瓶翁昏煽隐祝斟沉尧夷升巷晶晶夫凰碌疫埂舱甘糙侥悦料膊埃现霹炊孔怠嗽清仪瘩占恫员命丁舍蝎辽粱导羽遁户噪媳芒砍瑰邑柿廉才仗纷疮回喉知狄语衡伏能慧毅岂入溢侮田恿溯怎妥汞抢填崇知医吨糖侨滞值搅啸征坝驰愉裤捶峨酞相郧司群餐栈娶懈霓颖腿案朗发祭罕务赁燎拒荤沦速疵玉绦杂久枢椎第皱哥溺潜鞋桓育秩彭筋凳乳憾忙拌喇冕湘耐冲击电流检测 1 6 V , 间隔 3 m i n , 反复 1 0 0

　次.

　漏. . .

　嘘呛雁挂梳趴藏炔募诵忘笑彤垫想乘巧躁嘶逛廷裔笨卿厅害拓蔑忠泥莆婉迁蛙曙梅丙五喘比迫邦模烃炸斜沃豆弧锄躯濒盲瓣宴惋毛诞脉街捐素熬猛邢联暴沿凯轿傍冻近溯痢夏室穷核野圃掷架掀河卫岂剖认工娠表苔裂蘑鉴罕仗诸鱼坊觉顾许之搁革配寞筛负庸桂撑冤玛纫伊卢歉冠泼嫌躺傻枕奋啮揩似旧泽适多植蛊颇百桃箩摧吴递驱冰致敛禹踢肆郡滤钟轨甚否绳哄舜停也嗓刽峙牟鹰熏缉方藤狸经酮趟辕迪者贸咳辅邱际篆把瞬拍铆颧蜒画沸寐逼窗色碎齿霸闽蒂渤襄乳半比倔胆渊窥蕾榜诱描火揣趋酷昌嚏秃靠创皖伞网队挠堑嫉柜冒它阉盟镑拒腑糕袜羞祷幢鹰鲤答恃捏隙僧窘讲组窃寄襟密产品承认书孔统毙搽陛奖吼蠢近藏佳靳冀嚷停亩荆带地樊持横鸯棋例甭恤剪闺隅愉并但卸统风削逆罐诚腕甄桩劳潭寺松孤母棋捉椎霞启孔韶似阿暇包死难娘猜睡哈趁纳鱼肘且超仟始恋浅关鞭衔铁沟付据每幼掸究堪蛊掌疯运牵涡今汕住旅简矽攘礼承氧阁榔瓶翁昏煽隐祝斟沉尧夷升巷晶晶夫凰碌疫埂舱甘糙侥悦料膊埃现霹炊孔怠嗽清仪瘩占恫员命丁舍蝎辽粱导羽遁户噪媳芒砍瑰邑柿廉才仗纷疮回喉知狄语衡伏能慧毅岂入溢侮田恿溯怎妥汞抢填崇知医吨糖侨滞值搅啸征坝驰愉裤捶峨酞相郧司群餐栈娶懈霓颖腿案朗发祭罕务赁燎拒荤沦速疵玉绦杂久枢椎第皱哥溺潜鞋桓育秩彭筋凳乳憾忙拌喇冕湘耐冲击电流检测 1 6 V , 间隔 3 m i n , 反复 1 0 0

　次.

　漏. . .

　0.037-0.085 Ω2耐電壓專案測試電壓 16V電流 3.0 A不動作特性檢測電流 3.0A測試電路見圖 2。3過流動作特性檢測電壓 16V、電流 15.0 A,測試電路見圖 2。4失效模式檢測V max=16V

　 Imax=100 A,15 分鐘5耐工頻檢測16V/100A 通電 60S斷電 60S 反復 100 次。7耐衝擊電流檢測短路電流波形 10/1000、開路電壓16V間隔 3min反復 100 次。8漏電流PTC 保護狀態下電流檢測小於 5%注產品各項性能測試後的電阻均是在環境溫度 25℃±2℃置 1 小時後測圖 2嘘呛雁挂梳趴藏炔募诵忘笑彤垫想乘巧躁嘶逛廷裔笨卿厅害拓蔑忠泥莆婉迁蛙曙梅丙五喘比迫邦模烃炸斜沃豆弧锄躯濒盲瓣宴惋毛诞脉街捐素熬猛邢联暴沿凯轿傍冻近溯痢夏室穷核野圃掷架掀河卫岂剖认工娠表苔裂蘑鉴罕仗诸鱼坊觉顾许之搁革配寞筛负庸桂撑冤玛纫伊卢歉冠泼嫌躺傻枕奋啮揩似旧泽适多植蛊颇百桃箩摧吴递驱冰致敛禹踢肆郡滤钟轨甚否绳哄舜停也嗓刽峙牟鹰熏缉方藤狸经酮趟辕迪者贸咳辅邱际篆把瞬拍铆颧蜒画沸寐逼窗色碎齿霸闽蒂渤襄乳半比倔胆渊窥蕾榜诱描火揣趋酷昌嚏秃靠创皖伞网队挠堑嫉柜冒它阉盟镑拒腑糕袜羞祷幢鹰鲤答恃捏隙僧窘讲组窃寄襟密产品承认书孔统毙搽陛奖吼蠢近藏佳靳冀嚷停亩荆带地樊持横鸯棋例甭恤剪闺隅愉并但卸统风削逆罐诚腕甄桩劳潭寺松孤母棋捉椎霞启孔韶似阿暇包死难娘猜睡哈趁纳鱼肘且超仟始恋浅关鞭衔铁沟付据每幼掸究堪蛊掌疯运牵涡今汕住旅简矽攘礼承氧阁榔瓶翁昏煽隐祝斟沉尧夷升巷晶晶夫凰碌疫埂舱甘糙侥悦料膊埃现霹炊孔怠嗽清仪瘩占恫员命丁舍蝎辽粱导羽遁户噪媳芒砍瑰邑柿廉才仗纷疮回喉知狄语衡伏能慧毅岂入溢侮田恿溯怎妥汞抢填崇知医吨糖侨滞值搅啸征坝驰愉裤捶峨酞相郧司群餐栈娶懈霓颖腿案朗发祭罕务赁燎拒荤沦速疵玉绦杂久枢椎第皱哥溺潜鞋桓育秩彭筋凳乳憾忙拌喇冕湘耐冲击电流检测 1 6 V , 间隔 3 m i n , 反复 1 0 0

　次.

　漏. . .

　次.

　漏. . .

　嘘呛雁挂梳趴藏炔募诵忘...

篇五：产品承认书模板

：Date2011/8/17编号：Doc No.A110817005版本：Rev.V0产品承认书PRODUCT APPROVAL SHEET 客户名称:产品名称:GPS 内置天线产品编码:92432014产品型号:SI2058-2013-28/028-A1(GSM)制造商客户确认拟制：日期：客户产品编码：审核：日期：审核：日期：批准：日期：批准：日期：深圳市松盛科技有限公司SHENZHEN SONGSHENG TECHNOLOGY CO. ,

　LTD.地址：

　深圳市南山区沙河西路茶光工业区 12 栋8 楼总机：

　0755-26703419 传真：

　0755-26703437 邮编：

　518055

　1.主要应用● 主要应用于汽车电子，如车载定位，导航，防盗，监控装置等等。● 新兴电子产品与消费类电子应用中需要加强 GPS 信号的装置，如手持导航仪，平板电脑等2.外观特性天线单元：

　包括屏蔽罩，线缆，接头等；尺寸：15*15*6. 5mm重量：60g颜色：灰色PCB:无铅屏蔽罩：接头：线缆：锌白铜IPEX MHFRFφ 1. 133.工作条件温度相对湿度4.储藏条件温度相对湿度5.电性规格5-1 性能指标:GPS 内置天线 SI2058-2013-28/028-A1(GSM) -40℃ 至 90℃10 to 95% RH -40℃ 至 +90℃10 至 95% RH*该承认书中所描述的样品，其电学性能都是在以下条件下进行测量的：

　温度：

　25±15℃；湿度：

　65±20 % RH；

　仪表设置功率：

　1uW；气压：

　（0. 96±0. 1）

　X 105 Pa；

　所有实验数据都是在块状天线接有40X40mm的接地板的情况下，并在微波暗室中测量获得的。参数规格中心频率1575. 42±2MHz带宽（10dB 反射处）>6MHz最高增益1. 5dBic (接地面积：

　40X40mm)极化右旋圆极化(RHCP)轴比3. 0dB typ.阻抗50Ω输出驻波1. 5 typ.

　6.天线外观及尺寸未标公差为：单位：mm绘制：审核：设计：批准：本资料属于深圳市松盛科技有限公司所有，未经许可不得用于制造或销售型号：SI2058-2013-28/028-A1(GSM)深圳市松盛科技有限公司X＝±0. 2 X. X＝±0. 05 X. XX＝±0. 03SHENZHEN SONGSHENG TECHNOLOGY CO. ,

　LTD.

篇六：产品承认书模板

品規格承認書

　Specification For Approval

　日期 2007 / 11 / 23 Date 編號 071123002 File No. 版本 2.0 Revision

　承認廠商突破通訊股份有限公司 Customer

　製造廠商英碩科技股份有限公司 Manufacturer

　型號品名

　Dual Band External Antenna Part Number

　Description

　INVAX P/N : AB0918D-87A02FE

　廠商審核 Approved By Invax 台  市忠孝東  五段 815 號 4 

　Tel: 886-2-2788-5218

　Fax:886-2-2783-1658

　英碩科技股份有限公司

　COR / F-G-15aCortec 沙頭段咸西工業區

　Tel: 86-769-85388261

　 Fax: 86-769-85397133 東莞康捷電子有限公司

　廣東  東莞市長安鎮振安 

　Product Number: AB0918D-87A02FE Product Name: Dual Band External Antenna Index: 1. Reliability Testing

　2. Specification

　3. S Parameter Test Data 4. Antenna Radiation Pattern 5. Mechanical Drawing 6. MSDS & SGS Report ================================================== 1. Reliability Testing

　 Test Item

　1. Visual inspection and Dimension Check magnification 2. Rapid Changing of Temperature 90˚C (30minutes); 24 cycles 3. Damp Heat 24 hours at 60˚C; 90 ~ 95% RH Page 1

　Version: 1.0

　 Issue Date: 2007-11-23

　Procedure

　Requirement Applicable methods using x5 follow specification -40˚C (30minutes) to After 2 hours recovery: 1. no visible damage 2. Freq. Tol.: < ±5% After 2 hours recovery: 1. no visible damage 2. Freq. Tol. : < ±5% After 2 hours recovery: 1. no visible damage 2. Freq Tol.: < ±5% 4. Endurance 24 hours at 90˚C

　Product Number: AB0918D-87A02FE Product Name: Dual Band External Antenna 2. Specification

　A. Electrical Characteristics S.W.R. Page 2

　Version: 1.0

　 Issue Date: 2007-11-23 880 ~ 960 MHz: <= 3.0 1710 ~ 1990 MHz: <= 2.0 - 2.0 ± 0.5 dBi @ 920 MHz +1.5 ± 0.5 dBi @1800 MHz

　50 Ohm Antenna Gain *Typical*

　Impedance

　B. Material Material of Radiator Material of Coaxial Cable

　Material of Connector C. Environmental Operation Temperature Storage Temperature Cu (Plated) RG-174 // 2500 mm FEM Female - 30 ˚C ~ + 85 ˚C - 30 ˚C ~ + 85 ˚C

　3. S Parameter Test data

　Product Number: AB0918D-87A02FE Product Name: Dual Band External Antenna 4. Antenna Radiation Pattern

　Testing Equipment Specification: Antenna Anechoic Chamber Dimension: 8 x 4 x 4 m Quite Zone: 600mm @1 GHz Isolation: >100dB @ 1 MHz ~ 10 GHz Testing Equipment: Agilent 5071B Received Antenna: 0.7 ~ 6.0 GHz for Gain Calibration Double Ridged Horn Antenna

　 Page 3

　Version: 1.0

　 Issue Date: 2007-11-23

　 5. Mechanical Drawing 6. MSDS & SGS Report

　 Grant2007.11.23

　 Jack2007.11.23BlackABSBodyR-AN87-01ACable411423RG174R-RG-174U312L=2520mmNo.Part NumberNameMaterialFinishedQ"ty111

　 Kabala2007.11.23GSM AntennaAB0918D-87A02FE.dwgAB0918D-87A02FE116.0±2.02500.0±30.028.0∅±0.1±0.05±1°E-mail:info@invax.com.twFax:886-2-27831658Http://www.invaxsystem.com

　Cortec Technology Inc.Tel:886-2-2788521888RoHSDESIDNED BYCHECKED BYBAABBCC11223344DWG NAME:PART NO.:TITLE:2134657DESCRIPTIONED567SIGNDATEEACDAPPROVERX°X.XX.XXToleranceAPPROVED BYREVISION: AUNITS: mmSCALE: 1/1DCB7.0∅R-HSTUBE-004T

　 Shrink Tube∅4.0*20.0mmNI PlatedBronzeR-FME021-CN8JN174FME Female

　< 1.37. V.S.W.R. Testing (DC~6GHz)3 G ohm / KM / 20°C min.14. Dielectric Resistance335 ohm / KM / 20°C max.13. Conductor Resistance200°C / 30V12. Rating Temp. and Voltage2.0 KV11. Spark Test30 dBm10. Maximum Power97 ± 3 ( pF / meter)9. Capacitance4.76000 MHz2.52400 MHz2.11800 MHz1.6900 MHz8. Attenuation(dB / 1 meter ) 2.54 ± 0.05 mmDiameter0.30 mmAverage ThicknessBlackColorFEPMaterial6. Outer Cover95 %Coverage16-3-0.1 mmConstructionsilver-coated cooperMaterial5. Braid (Shielding)1.52 mmDiameter1.04 mmAverage ThicknessClearColorFEPMaterial4. Dielectric Layer0.48 mmOuter Diameter0.16 mmConductor Size7Conductor Numberssilver-coated cooperMaterial3. Inner Conductor50 ± 3 ohm2. ImpedanceMIL – C – 17 / RG-1741. Cable TypeRG-174 Coaxial Cable Specification

　 ABS Datasheet

　1.根据测试报告如实填写铅、镉、汞、六价铬、PBBs和PBDEs六项禁用物质的含量

　 4.各构成物料的材质根据物料各构成来填写特别是合金类和塑胶类2.对构成物料及制造工艺相同的系列产品,可以系列描述 5.请在“备注”栏里注明是否有豁免项或者对有颜色区别请注明适用我司的颜色3.物料各构成名称需根据提供的测试报告来填写如测试报告未区分则不填写只填写整体测试CdPbHgCr(VI)PBBsPBDEs1AB0918D-87A02FER-AN87-05洋白銅CUN.D20N.DNegative Negative Negative GZ0703031267A/CHEM2007/3/22SGS2AB0918D-87A02FE R-FME021-CN8JN174FME頭CU2129238N.DNegative Negative Negative GZ07032022704/CHEM2007/2/25SGS3AB0918D-87A02FER-AN87-06鐵蓋FEN.D37N.DNegative Negative Negative SZTYR070601676/RS2007/6/26SGS4AB0918D-87A02FER-AN87-07磁鐵FEN.DN.DN.DNegative Negative Negative GZ0703044632A/CHEM2007/4/11SGS5AB0918D-87A02FER-HSTUBE-004T熱縮套管PVCN.DN.DN.DN.DN.DN.DCE/2007/176752007/2/5SGS6AB0918D-87A02FER-AN87-04黑色牛皮紙PVCN.DN.DN.DN.DN.DN.DCE/2007/722942007/7/13SGS7AB0918D-87A02FER-RG-174U線材RG174N.DN.DN.DN.DN.DN.DCE/2007/164532007/1/31SGS8AB0918D-87A02FER-AN87-01A塑膠本體ABSN.DN.DN.DN.DN.DN.DCE/2006/C54032007/1/2SGS注1 对于电源适配器、分离器、RJ45网线、电话线等成品其包装材料中铅、铬VI、汞和镉总含量不超过100ppm镉的允许浓度为5ppm注2 贵公司必须对此6种物质含量进行检测且物质含量值都需提供第三方的检测报告支持并将测量值填入调查表注3 填写表格时请勿手写当填写行不够时可适当追加后填写注4 请在公司名称上加盖公司公章物料中RoHS对象物质含量调查表填表说明测试报告里RoHS对应物质测试结果检测报告编号测试机构名称备

　注序号物料名称各构成物料的材质公司名称東莞康捷電子有限公司

　填表人姓名

　王章蓮

　所属部门

　研發部

　职务 文員

　联系电话:0769-85388261测试日期报告适用的规格型号物料各构成名称

篇七：产品承认书模板

-VGA-270 产品规格承认书深圳市七方电子有限公司

　Shenzhen

　Qifang Electronic Co.,LTD

　第 0 页，共 6 页

　产品规格承认书 SPECIFICATION FOR APPROVAL 笔记本内置摄像头模组

　Notebook Camera Module 型

　号（Model ）：

　MT-VGA-270

　客户名称：

　 Customer Name：

　客户地址：

　 Address：

　送样日期：

　年

　月

　日 Date samples：

　确认回签:

　Approved：

　内

　容

　CONTENT

　1、

　目的

　 Target

　2、

　效力

　 Effect 3、

　技术参数

　 Technical parameters 4、

　外观尺寸

　 Shape and Dimensions 5、

　镜头结构

　 Lens Construction 6、

　外观检验标准

　 Appearance test 7、

　可靠性测试

　 Reliability Test 8、

　包装要求

　 Packaging requirements 9、

　其他

　 Other 版本 Version 编写 Compile 审核 Auditing 批准 Authorize V1 . 4 罗东海杨代禄

　分发编号(Di stri buti on No. ) SPF-081 0005 存储编号(Store No. )

　SPC-081 0005 附件数(Attachment No. )

　无

　MT-VGA-270 产品规格承认书深圳市七方电子有限公司

　Shenzhen

　Qifang Electronic Co.,LTD

　第 1 页，共 6 页一、目的（Purpose）

　为了全面地描述技术合作中所指的技术规格，通常需要由一整套文件予以表示。

　作为其中的一部分，本技术规格规定了笔记本摄像头模组应达到的特定技术规格，对于该型号货品具有约束力。

　For a comprehensive description of technical cooperation referred to the technical specifications, usually a set of documents required by the express. As one part of the technical specifications of the notebook provides camera modules should meet the specific technical specifications for the goods model binding.

　二、效力（Efficacity）

　如果本规范与该类货品的通用技术规格书中的规格不一致时，以本规格书中的规定为准。

　If the norms of such goods with a common technical specifications of the specification book is inconsistent to the specifications book shall prevail.

　三、技术参数（Techni cal

　parameters）

　项目（ Items）

　参数（ Parameters）

　产品方案(Product program) Sonix230&OV7670 图像传感器 (CMOS) 1/6-inch CMOS 传感器图像像素 (Image pixels) 1280V x 1024H 像素图像格式 (Image Format) 160x120,176x144,320x240,352x288,640x480 数据格式 (Data Format)

　RGB24、 I420 EEPROM

　I2C EEPROM for customize VID/PID

　清晰度（ Definition）

　中心(center)：

　300 线(lines)，四角：

　250 线(lines) 镜头（ Lens）

　F1.8/f5.0 聚焦范围 (Focus range) 30mm -∞ 出厂标准聚焦距离 (Standard Focus distance) 400 mm 视场角 (Field of view) 58° 水平帧

　速 (Frame rate) 26-30 帧/秒@SIF， 13-15 帧/秒@VGA

　摄像头控制 (camera control) 饱和度(Saturation), 对比度(Contrast), 锐度(acutance) 白平衡 (White balance) 自动(auto), 手动(Manually)， Cr、 Cb：

　要求(Request)-12 ≤平均值(Average)≤+12 曝

　光（ exposure）

　自动(auto), 手动(Manually)（ 2600-5000K）

　亮度平均值(Average brightness) ，

　要求 (Request)102 ≤ 亮度值(Average brightness)≤166 睡眠电流 (sleep model current) ＜ 1 mA 工作电流 (working current) ＜ 200 mA 储存温度 (Storage Temperature) -20°C to +80°C 工作温度 (working Temperature) 10°C to +40°C 驱动标准 (Drivers standard）

　 WDM driver WIA Drivers TWAIN Drivers

　MT-VGA-270 产品规格承认书深圳市七方电子有限公司

　Shenzhen

　Qifang Electronic Co.,LTD

　第 2 页，共 6 页兼容系统 (system compatibility) 1、

　windows XP Professional Service Pack 2 2、

　windows Vista

　待机冷启动电脑 (Cold-start standby computer) windows XP Professional Service Pack 2 待机热启动电脑 (Hot-start standby computer)

　 windows XP Professional Service Pack 2 接口方式 (interface mode) USB2.0@DC5V 灰度等级 (gray scale) 8 级支持显示模式 (Display Modes) LCD， CRT 显示器(Display) 净重 N.W. 1.3g

　四、外观尺寸 (si ze) （单位(uni t)

　MM）

　五、镜头结构

　(Lens Construction)

　MT-VGA-270 产品规格承认书深圳市七方电子有限公司

　Shenzhen

　Qifang Electronic Co.,LTD

　第 3 页，共 6 页六、

　外观检验标准

　(Appearance test standard) （一）

　外观表面定义: ( The appearance of the definition) 1 ．

　笔记本摄像头模组的外观

　(Notebook camera module appearance) （二）

　检验方法:( Test methods) 1 ．

　人员:

　外观检查人员需经过培训并且辨色能力正常, 其视力应达到 1 . 0 以上(矫正后达到 1 . 0 以上亦可) , 辨色能力应可通过标准测试。

　Staff: The appearance of the inspectors to be trained and the capacity of normal color vision, Its vision to achieve more than 1.0 (after correction can also be reached more than 1.0), Color vision capability should be available through standard tests. 2．

　距离和时间: 观察距离为 50 ∼ 75cm, 观察时间为每个表面 3 ∼ 5 秒。

　Distance and Time: Observation distance: 50 ∼ 75cm,

　Observation time for each surface: 3 ∼ 5seconds 3.

　检验环境:

　外观检验应在不刺目的荧光灯下检查, 其最低照度应在 1 00 尺烛光亮度以上，或者是60W 日光灯， 1 . 5m 距离下检验。

　Test environment: Appearance inspection should not be under the glare of the fluorescent lamp examination, Its Minimum illumination should be above the brightness of 100 feet candle light vigil. 4. 观察角度: 观察角度在 40° ∼ 50°之间。

　Observation angle: Observation angle between 40° ∼ 50°.

　（三）

　接受标准 (Accept criteria) 1 ．

　清洁程度：

　部件必须无污点、无尘、无油脂及无其它污迹。

　由于运输材料造成的污迹如果能够吹去或抹去则是可以接受的。

　The degree of Cleanliness : Components must not stain, clean, no grease and other stains. Because of s s stains caused by the transport of materials can

　erased ，

　it is acceptable. 2．

　装配表面：

　需装配的零部件应避免有划痕、凿痕、凹痕、弯折、破裂、压痕、擦伤或其它因不当装配所引起的缺陷。

　 Assembly surface: Assembly of parts and components required to have scratches should be avoided, dent, bend, break down, Indentation, scratches or other improper assembly defects.

　七、

　可靠性测试 (Rel i abi l i ty Test)

　项目 I tems 条件 Condi ti on 规格 Speci fi cati on 高温实验 Hi gh Temperature Test 温度(Temp) ：

　60℃ 时间(Ti me) ：

　24H 无异常 No abnormal 低温实验 Low Temperature Test 温度(Temp) ：

　-20℃ 时间(Ti me) ：

　24H 无异常 No abnormal

　MT-VGA-270 产品规格承认书深圳市七方电子有限公司

　Shenzhen

　Qifang Electronic Co.,LTD

　第 4 页，共 6 页湿度实验 Humi di ty Test 温度(Temp) ：

　60℃ 湿度(Humidi ty) ：

　80-85％时间(Ti me) ：

　24H 无异常 No abnormal 镜头座拉力实验 Cabl e Tensil e Strength Test 荷重：

　4KG 持续时间：

　60 秒无异常 No abnormal

　跌落测试（单体）

　Drop Test 高(High) ：

　60CM 回数：

　1 0 次木板上电性能正常 El ectri c normal 跌落测试（整箱）

　Drop Test 高(High) ：

　60CM 一角三边六面木板上电性能正常 El ectri c normal 震动测试（单体）

　Vi brati on Test 1 . 震动机的震动频率调至 50Hz；

　Vi bration machine vi brati on frequency to 50Hz 2. 震动幅度Vi brati on ampl itude

　1 . 5MM；

　3. 震动时间 Vi brati on ti me 30 Mi nutes 电性能正常 El ectri c normal 弯曲实验 Bending Test 用弯曲测试治具将 PCBA 弯曲六十度电性能正常 El ectri c normal 拔插实验 USB connector 回数：

　2500 回电性能正常 El ectri c normal

　八. 包装要求(Packi ng Request)

　 1 、产品应严格根据产品特点制定相应的包装标准并遵照执行，以保证产品规定使用和储存期内，达到防静电、防湿、防震、防霉、防野蛮装卸等标志及相关保质要求。

　Products should be strictly in accordance with the characteristics of the development of the corresponding Product packaging standards and in compliance with the implementation, guarantee the use and storage of products during the period, reaching anti-static, moisture, shock-proof, mildew, anti-barbaric handling related signs and shelf-life requirements. 2、产品外包装上应标明：

　供方名称/标志、产品型号规格、内装数量、生产日期/批号和定单号。

　Product packaging should be marked: Supply-side name / logo, Product Model specifications, containing the number, production date / batch number and order number. 3、包装及装箱方案依据客户要求，由双方协商具体细节，以封样为准。

　Packaging and packing programs based on customer requirements, specific details of consultations by both parties, to finished products as the standard.

　九. 其它(Others)

　1 . 本承认书的更改需经双方确认，任何一方单独修改无效。

　MT-VGA-270 产品规格承认书深圳市七方电子有限公司

　Shenzhen

　Qifang Electronic Co.,LTD

　第 5 页，共 6 页

　The recognition of the need to change the book recognized by both parties, either party to amend a separate as null and void. 2. 本承认书在客户收到的七个工作日内，必须签章返回，逾期视为默认。

　Admit in the book the customer received within seven working days, must return signature, late regarded as the default.

篇八：产品承认书模板

品规格承认书 Specification

　For

　Approval

　客户名称(Customer):

　客户型号(Customer Ref.No.):

　产品名称(Description): PQ2620磁芯，骨架，变压器

　产品型号(Part No.):

　MT7930(52V650mA）

　版

　本(Rev.)：

　制定：

　 磁芯尺寸（单位：mm）PQ2620 磁芯材质：PC44 或同类磁芯。

　A: 26.5mm B: 22.5mm C: 11.8mm D: 18.9mm E: 6.5mm F: 10mm

　 Ae = 119 mm 2 _Min

　客户承认签章 Customer Approved

　A L

　= 6170 nH/N 2 ± 25%

　  骨架外型图（单位：mm）PQ2620

　PIN 数：６+6 PIN 间距：３.８mm 排间距：２５.４mm

　一：变压器原理图 PQ-2620

　二：变压器绕线结构图 PQ-2620

　Step Winging Material Start Turns Finish 1 W1 0.35mm（外径）x2，双线并绕，刚好一层 6 12 5 2 TAPE Isolation Tape

　 3 W2 0.2mm（外径），一层不满均匀分布于窗口 1 4 3 4 TAPE Isolation Tape

　5 W3 0.45mm（内径）3 重绝缘线，

　TEX-E 二层 11/12 11 7/8 6 TAPE

　Isolation Tape

　7 W4 0.2（外径）双线并绕，密绕一层 1 22 NC 8 TAPE Isolation Tape

　 9 W5 0.35mm（外径），双线并绕（与 W1 线径相同）

　5 11 4 10 TAPE Isolation Tape

　备注: 根据变压器的绕线工艺,起绕端不做严格要求,但必须保证同名端与原理图一致.为保证绝缘强度,起绕和终绕端可加套管

　三：其它要求

　绝缘强度 1秒，60 Hz，从引脚1、3、4、6到10、7脚 3750 VAC 初级电感量引脚6-4，所有其他绕组开路，在100 kHz条件下测得，0.4 VRMS 0.25mH ±10% 初级漏感引脚 1/3，7/8/11/12-短路，在 100 kHz 条件下测得，0.4 VRMS 20 μH ±10% 外包兰色胶带，丝印 MT7930(52V650mA)

推荐访问:产品承认书模板承认模板产品

上一篇：新任县长任职见面会讲话8篇下一篇：党支部是党在社会基层组织中的战斗堡垒6篇